Antique Hand Cranked Hammer Drill - Restoration

Dipublikasikan tanggal 19 Des 2020
Ditonton 19 373 926
8 264

It was in spring this year when I picked up this beaten up antique hand cranked hammer drill. My friend has found it on the steel waste together with the german „Weltrekord“ ratchet screwdriver. The condition of the drill was super bad. It was very corroded, had a lot of missing screws, the handle was in very bad condition and the crank was bent so much you couldn't even make a full turn. That's all said, it was the perfect item for a new restoration video.
At first I thought this should be a quick and easy project, but one problem after the other became visible and it turned out to be a real challenge. There was the big dent in the left side of the case. Usually you can't bend casted parts, but with a bit of heat and careful pressure on the arbor press I was able to remove it a bit. It also worked to get rid of the warping with some heat. For the finish of the housing I wanted to have an antique cast aluminium look. I thought it would look very cool if I could tumbler these parts after sandblasting. I ended up building a huge rotary tumbler from scratch and it worked very well (video link below).
Another big issue was the tool holder and the drill bit, as they were both completly rusted. Big thanks to @Hand Tool Rescue at this point for helping me out with the dimensions on these two parts by disassembling and measuring his own hammer drill. After a bit of search on eBay I found a set of original Rawlplug drill bits. After they arrived I was able to measure the shaft and the taper of the drill to then turn a new tool holder. It all worked out very well and yes, the drill only holds with the taper ;-)
Before I even started this project I just had one question in mind „How am I going to replace the messed up handle cover?“. My first idea was to wrap it in nice black leather like steering wheels are made. That would definitely work, but that's something I've never done before so I was quite sceptical. Then the idea of a heat shrink tube came up. That would be a very easy solution, but heat shrink tubes don't have any structuires to it and it wouldn't quite fit the the rest of the tool. Thanks to the research of my Patreons and channel members, they have found very special heat shrink tubes that have a structure in it. I really liked it as it almost looked exactly the same like the original handle.
After all it was a very intense and time consuming project. I've done so many hours of research on this one and I had to learn new skills. I'm very happy how it turned out.
I hope you like my work and the video.
Huge thank you to all of my Patreon supporters and specially to:

Tonya M Broerman
Zack Thompson
Adel AlSaffar
afreeflyingsoul
Yale Baker
Gregory
Alex McGeorge
Alistair Moor
Amar.k
Bendurion
Courtney Maleport
David Barker
Greg Marston
Joshua Bentley
Lambda GPU Workstations
Luke Schmick
Luke Stone
Matt Bosch
Mellissa Marcus
Mike Schlodder
Monte Gibbs
Muzaffer Aksoy
Nick Houston
Paul Mampilly
potokslow
Todd Medbury
Vickie Bligh
Vince Valenti
Xavier Carbel
Yuri Zapuchlak
Aaron Quante
Alex Breton
alex latzko
Allen Frank
Amanda Taylor, Esq
Andreas Mimra
Andrew Phillips
Anthony Adams
Arni Bjorgvinsson
audi4444player
Blake T
Brandon Fitzwater
Brian Newton
Carlo
Chad Bryant
Chris Simondet
Grok Senften
Haley McFadden
Harper Kim
Hunter R.
Jason Koi
Jason Tarlov
Jeremy Cole
Jonas Richartz
Jordan Page
justin f.
Kelly Imgrund
Kurt Gazow
Marc Cerisier
Marius Costan
Martin Rønnow Klarlund
Mellissa McConnell
Michael Bier
Mickey Eisenhorn
Mike Donaldson
Nick Cannon
Pasacal Schmikal
Philipp
Schultes Thomas
Scott Marshall
Sergei Shvartsman
Svenja Kuckla
The Carlsons
Trevor Kam
Tucker Ifft
Warren G Strand Jr
William Wallace
웅록 윤

My camera:
Panasonic HC-VX11

If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, it's not my language. I try my best to improve my technical english.
Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Thank you for watching :-)

Building a Huge Rotary Tumbler from Scratch - Homemade Rotary Tumbler
idvision.info/first/video/lGJssJmKdm-ghMY.html
„I make a new one“ T-Shirts:
teespring.com/stores/my-mechanics
My Main Channel:
idvision.info
My Second Channel:
idvision.info/call/4EQCwfH54ieNPswtXh5K0w
My Patreon Page:
www.patreon.com/mymechanics
Follow me on Instagram:
my_mechanics
My Facebook Page:
My-mechanics-1966277857002099/

my mechanics
my mechanics
Komentar  
  • Al Depantchu

    Al Depantchu

    5 jam yang lalu

    Your measurements are flawless. We are talking micrometers sometimes.

  • adnilson correa

    adnilson correa

    7 jam yang lalu

    How long did it take?

  • B

    B

    8 jam yang lalu

    Okay time to get off youtube, the "bluing liquid" broke my brain...

  • Y Qisq

    Y Qisq

    13 jam yang lalu

    wow that's how it works.

  • Manah Rasa

    Manah Rasa

    16 jam yang lalu

    Bdjjsbs

  • Manah Rasa

    Manah Rasa

    16 jam yang lalu

    Bshdid

  • cem coskun

    cem coskun

    16 jam yang lalu

    the mechanics asmr

  • Мастер Сваргань-ка

    Мастер Сваргань-ка

    17 jam yang lalu

    Friends, support the masters from Russia. Beginner channel, I will be grateful

  • Jur4S

    Jur4S

    17 jam yang lalu

    You rly hate hard eadges :D

  • Jamalludin Jamall

    Jamalludin Jamall

    18 jam yang lalu

    Nice workmanship...someday i hope i have the machine to make restoration..

  • punjab Issues

    punjab Issues

    19 jam yang lalu

    Peace at 25:23☺️

  • Sergey

    Sergey

    20 jam yang lalu

    Испытывайте устройство после реставрации👍

  • INFO LIKE US

    INFO LIKE US

    21 jam yang lalu

    This is not restoration this is destruction 👎

  • Птичка Таро

    Птичка Таро

    22 jam yang lalu

    Кто знает,что за краска? Он покрывает метал.

  • Francisco L. Buenfil

    Francisco L. Buenfil

    23 jam yang lalu

    i hate the bluing

  • Songs in 8d

    Songs in 8d

    Hari Yang lalu

    IT looks like mp40

  • Charles Jordan

    Charles Jordan

    Hari Yang lalu

    Your machining skills are second to none sir.

  • Vanish Chandan

    Vanish Chandan

    Hari Yang lalu

    Dont watch these videos... They are addictive😂😂😍

  • Branman Hosmaniac

    Branman Hosmaniac

    Hari Yang lalu

    What fuel is used in your torch!!

  • Takeo S

    Takeo S

    Hari Yang lalu

    8:49 this part impressed me a lot. made 2 pieces to 1 seamlessly

  • Thamizhiniyan S

    Thamizhiniyan S

    Hari Yang lalu

    You are so precise and gentle...
    No material is harmed in the making of this video...

  • Silvio Romero

    Silvio Romero

    Hari Yang lalu

    O mi god😱

  • Mr Trickyfingers

    Mr Trickyfingers

    Hari Yang lalu

    Bro the metal turning black is like magic

  • A_B_N_SYRIA

    A_B_N_SYRIA

    Hari Yang lalu

    Well done

  • A_B_N_SYRIA

    A_B_N_SYRIA

    Hari Yang lalu

    Wow

  • Kevin ff

    Kevin ff

    Hari Yang lalu

    Aca esta el comentario en español que buscabas 😼🤠

  • Sam Armstrong

    Sam Armstrong

    Hari Yang lalu

    I really wish my dad were alive so he could watch your videos( he was an engineer too)👍

  • RT1_ Firegod

    RT1_ Firegod

    Hari Yang lalu

    Schweiz???

  • seikhuneo kips

    seikhuneo kips

    Hari Yang lalu

    Here we see human is nothing without machine if brain is not exist in human body then just think

  • Andres Felipe Montenegro Quintero

    Andres Felipe Montenegro Quintero

    Hari Yang lalu

    best 26 mins of my life

  • CASTLE EXPLORER ALADIN KI KAHANI

    CASTLE EXPLORER ALADIN KI KAHANI

    Hari Yang lalu

    Who thought this mp 40 of free fire and come in this video
    👇

  • корней чуковский

    корней чуковский

    Hari Yang lalu

    срочно нужно 1000 подписчиков!!!!помогите плИИИИИИЗззззз!!))

  • Mr. Coca. Cola !

    Mr. Coca. Cola !

    Hari Yang lalu

    Что за черная краска ? Необычная

  • Y.E.S.

    Y.E.S.

    Hari Yang lalu

    nvm you did

  • Husky

    Husky

    Hari Yang lalu

    Alternative title: Batman's First Grapplin Hook - Restoration

  • Leo Park

    Leo Park

    Hari Yang lalu

    WHAT...this dude can literally make anything with his ability.
    Very masterful craftmanship.

  • Alexandre Rodrigues

    Alexandre Rodrigues

    Hari Yang lalu

    E agora como é que vai atira com essa bugiganga aí pow😕😕😕

  • Adrienn Gugi

    Adrienn Gugi

    Hari Yang lalu

    Cool

  • Nurbek

    Nurbek

    Hari Yang lalu

    Отличная работа!👍👍👍👍👍

  • Orion Pullen

    Orion Pullen

    2 hari yang lalu

    extremely well done.
    pretty confident the shoulder plate should be turned 90 degrees. I don't think it would be comfortable to use as shown. But, thas small potatoes. Superb!

  • erken konuşma

    erken konuşma

    2 hari yang lalu

    YIL 2021 OHAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA

  • Lakhan singh Rajput

    Lakhan singh Rajput

    2 hari yang lalu

    Mp 40 😁

  • Leon Kriner

    Leon Kriner

    2 hari yang lalu

    Amazing!

  • Steezy_cain

    Steezy_cain

    2 hari yang lalu

    Imagine knowing u had a dead mans old skin particles on ur hands

  • Aditya Sagar

    Aditya Sagar

    2 hari yang lalu

    WOW Victor SMG GUN😍😍😍😍

  • alexandre magno Magno

    alexandre magno Magno

    2 hari yang lalu

    Qual é o nome desta ferramenta?...
    Brasil.Rj.

  • Yasmin Fernandes

    Yasmin Fernandes

    2 hari yang lalu

    O

  • اسماعیل شاهوزی

    اسماعیل شاهوزی

    2 hari yang lalu

    عالی بود

  • SCG

    SCG

    2 hari yang lalu

    WOW! Looks awesome!

  • Paulina Xavier

    Paulina Xavier

    2 hari yang lalu

    Parabéns pelo trabalho ! Magnífico.

  • lashawnda hibbard

    lashawnda hibbard

    2 hari yang lalu

    For someone who has no idea about metals and parts and all of that what does the bluing do is it like a protective coat Maybe a rust preventer both I'm not sure I just kind of wanted little you know it's like a rust preventer or you know a little help please other than that great video

  • Grace Masih

    Grace Masih

    2 hari yang lalu

    Bander

  • sparki

    sparki

    2 hari yang lalu

    dopiero po 26 minutach dowiedziałem się że to nie służy do łowienia ryb

  • Mr.Krestik

    Mr.Krestik

    2 hari yang lalu

    кто русский ?

  • - Ооо-ооО

    - Ооо-ооО

    2 hari yang lalu

    🤣👍

  • Артур Хурумов

    Артур Хурумов

    2 hari yang lalu

    привет

  • Karl Marx

    Karl Marx

    2 hari yang lalu

    :)

  • أبو زيد النحوي

    أبو زيد النحوي

    2 hari yang lalu

    مافي عربي هنا 😊😊🙂🙂

  • Konrád Kopečný

    Konrád Kopečný

    2 hari yang lalu

    Hi, Nice piece of work. What is the " very special heat shrink tubes" please. This info would be very useful for some other of us.

  • Martin Kaufmann

    Martin Kaufmann

    2 hari yang lalu

    Saw that kind of tool the first time... cool thing... superb restourartion and good insights how it mechanicaly workes... thx

  • Lexx Str

    Lexx Str

    2 hari yang lalu

    Полчаса эстетического удовольствия! С какой любовью всё сделано! Просто нет слов.

  • April Maulana

    April Maulana

    2 hari yang lalu

    Asmr

  • Poher

    Poher

    2 hari yang lalu

    завораживает

  • bilal kaya

    bilal kaya

    2 hari yang lalu

    Yarım saattir silah yapacak saniyom bende meğer matkap yapıyormuş 😃

  • Alex Popa

    Alex Popa

    3 hari yang lalu

    this channel should be named "I make new one" :)))

  • josh johnson

    josh johnson

    3 hari yang lalu

    should have kept the dent imo, its part of that specific tools history and personality. If your gonna fix every little bit of it why not just make a new one from scratch?

  • zeeno

    zeeno

    3 hari yang lalu

    just douse it in oil

  • WholeLottaMiata 69

    WholeLottaMiata 69

    3 hari yang lalu

    I love my sandblaster, it’s so satisfying to use

  • Aurelien Benoit

    Aurelien Benoit

    3 hari yang lalu

    Looks like a bioshock 3 weapon

  • Mohammad Mursalin

    Mohammad Mursalin

    3 hari yang lalu

    You practically made the entire thing except for the main casing. But that drill looks absolutely beautiful.

  • Claudio Gioacchino Maria Marsico

    Claudio Gioacchino Maria Marsico

    3 hari yang lalu

    WELL DONE!

  • قاسم عبد الرحيم

    قاسم عبد الرحيم

    3 hari yang lalu

    اكو عرب باّلطياَرة

  • IMMORTAL SOHAM

    IMMORTAL SOHAM

    3 hari yang lalu

    Idk but it looks like mini 14 from pubg lmao

  • Phb Phb

    Phb Phb

    3 hari yang lalu

    No😡😡😡😡😡😡😡😡👿👿🤮🤮🤮😓😓GUN!

  • nmgb zda

    nmgb zda

    3 hari yang lalu

    أخمص الكتف بالعكس ارجو تصحيح التصليح

  • Tidal Epc

    Tidal Epc

    3 hari yang lalu

    im kinda sad he didn't use the OG drill bit

  • Azibrani Thoriq

    Azibrani Thoriq

    3 hari yang lalu

    i like it

  • Carsten Siu

    Carsten Siu

    3 hari yang lalu

    Is it just me or low key it looks like a Sturmpistole

  • Sreekumar M R

    Sreekumar M R

    3 hari yang lalu

    Excellent 💕

  • boryavasili

    boryavasili

    3 hari yang lalu

    Man, my absolute favorite part is when the rivet on the shoulder plate is ground down so seamlessly.

  • lachlan pike

    lachlan pike

    3 hari yang lalu

    What was your nightmare restoration

  • Lynch Creek Muzzy

    Lynch Creek Muzzy

    4 hari yang lalu

    ASMR for mechanics

  • Булька и Шарик

    Булька и Шарик

    4 hari yang lalu

    I'm not even mechanically inclined, but your videos are addictively beautiful.

  • Michael Howe

    Michael Howe

    4 hari yang lalu

    This guy is the king of fix old things that would normally be thrown away

  • Lol Rekt

    Lol Rekt

    4 hari yang lalu

    25:18
    I - inspect weapon

  • powderedwater67

    powderedwater67

    4 hari yang lalu

    that is freaking beautiful. Any way to make it hold modern day drill bits?

  • Christi Delaport

    Christi Delaport

    4 hari yang lalu

    Does bluing have any physical purpose or is it solely for aesthetics?

  • Станислав Матвеев

    Станислав Матвеев

    4 hari yang lalu

    Вы девушка, признайтесь, пальцы аккуратные, не верю)

  • Рая Какимжанова

    Рая Какимжанова

    4 hari yang lalu

    Вери гууд😄👍

  • GGG KKK

    GGG KKK

    4 hari yang lalu

    это ручная дрель

  • Ольга Шуматова

    Ольга Шуматова

    4 hari yang lalu

    А что это вы оживляли

  • Florin Frangulea

    Florin Frangulea

    4 hari yang lalu

    good work like

  • Bean

    Bean

    4 hari yang lalu

    I wonder what would happen if we showed this to the original creator

  • DRKDark-_-

    DRKDark-_-

    4 hari yang lalu

    To be honest whenever I first saw the thumbnail and didn’t read the title I thought it was a harpoon gun

  • damon2772nomad

    damon2772nomad

    4 hari yang lalu

    I need like 4 minutes of use on this. It sounds great and looks better.

  • captain rex

    captain rex

    4 hari yang lalu

    With stuff like this be careful or else you will get tetanus

  • Federico Angel Gonzalez

    Federico Angel Gonzalez

    4 hari yang lalu

    literalmente mejor que nuevo ? xd

  • Måřțû Måřçh

    Måřțû Måřçh

    5 hari yang lalu

    15

  • Måřțû Måřçh

    Måřțû Måřçh

    5 hari yang lalu

    14

  • Måřțû Måřçh

    Måřțû Måřçh

    5 hari yang lalu

    felipe